|
Many machine vision applications require the imaging The helical mounts UNIFOC 58 and UNIFOC 76 are used for
focusing the enlarging lenses, which do not contain any internal
focusing mechanism. The helical mounts offer a total focus range (Z-axis
travel) of 25.7 mm and |
differ only by their rear mount. The UNIFOC 58 has a "male" T2 thread (M42 x 0.75). The UNIFOC 76 has a "male" M58 x 0.75 thread. The UNIFOC 76 is the best choice for cameras with long linear CCDs. The final focus setting can be locked by a knurled locking thumb screw and additionally secured by an opposite Allen screw. The helical mounts can be adapted easily with extension tubes and adapters to a wide range of imaging applications. |
|
|
|
| Lenses | |||||||||||||||||||||||||
|
Example: |
The following SCHNEIDER enlarging lenses are available for the helical mounts UNIFOC 58 and UNIFOC 76.
| ||||||||||||||||||||||||
| Unifoc | |||||||||||||||||||||||||
|
Example: |
The UNIFOC 58 has a T2 thread (M42 x 0.75), the UNIFOC 76 a thread M58 x 0.75.
| ||||||||||||||||||||||||
| Extension Tubes | |||||||||||||||||||||||||
|
Example: |
| ||||||||||||||||||||||||
| Camera Adapter | |||||||||||||||||||||||||
|
|
| ||||||||||||||||||||||||
|